See More About:
Ripper Bulldozer (SD8N Bulldozer)
by
ramsingh
Ripper Bulldozers are used in land clearing operations where heavily compacted soil or frozen ground must be separated, allowing easier grading and dozing to take place. The steel shanks penetrate the surface of the soil to break and loosen it, enabling the bulldozer blade to move the soil.
SD8N bulldozer is track-type dozer with elevated sprocket, hydraulic direct drive, semi-rigid suspended and pilot hydraulic controls. Equipped with hydraulic-mechanic type torque converter, planetary, power shift transmission. It can be used in road building, hydro-electric construction, land clearance, port and mine development
Engine – Chongqing Cummins NT855-C280S10
Engine Rated Power (185 KW/248 HP)
Operating weight 23, 800 Kg (without ripper)
Pilot joy stick hydraulic control
Elevated sprocket ITM track and sprockets
ROPS and air-conditioned cabin, LED Lights
Semi-rigid suspended track system
ENGINE
Make:Chongqing Cummins
Model:Chongqing Cummins NTA855-C360S10
Type:Air to air after cooled, mechanical injector
Cooling System Type:Water cooled
Turbo charged:Yes
Rated Power (KW/HP):257/345
Rated Revolution (rpm):2100
Maximum Torque (N.m/rpm):1353/1400
No. of cylinders:6
Bore x Stroke (mm):140 x 152
Displacement:14 L
Fan Drive type:Mechanical
Min ground clearance (mm):556
Compression rate:14.5: 1
Fuel filter:2
Fuel System Type:Chongqing Cummins type, mechanical control fuel injection
Electricals
Alternator:24V / 50A
Starting motor:8 KW
Battery Rating:2 x 12V, 120 Ah
LED Lights:Yes
POWER TRAIN
Torque convertor / Clutch:Torque Convertor
Type:Power separating hydraulic mechanical type
Transmission/Gear Box:Transmission Type
Type / Model:Power shift planetary transmission with 3 speeds forward and 3 speed reverse, speed and direction can be quickly shifted
No. of gear forward:3
No. of gear backward:3
Max forward speed:10.8
Max reverse speed:13.9
Maximum drawbar pulls:1st gear – 250.9 KN 2nd gear – 230.4 KN
HYDRAULIC SYSTEM
Operation type:Pilot hydraulic control
Hydraulic pump
Type:Gears oil pump
Capacity / Discharge:220 (L/min)
Relief pressure / Max pressure:20 Mpa
Hydraulic cylinders
Type:Double acting piston type
Double acting piston type:2 / 120 x 1425
Blade tilt (No. of cylinders/bore x stroke):1 / 180 x 203
Ripper: (No. of cylinders /Bore x Stroke (mm)):Ripper digging: 2 / (165.1 x 445) Ripper lift: 2 / (180 x 280)
Control Valves Type:Pilot operated with joystick control
STEERING
Type:The steering clutch is hydraulic pressed, usually separated clutch
Steering Control:Hydraulically operated
UNDER CARRIAGE
Track gauge (mm) / Track pitch:2083
Track rollers (each side):8
Carrier rollers (each side):1
Track shoes (each side):44
Shoe width (mm):560mm
Ground pressure:94 Kpa including ripper and blade
No. of idler (each side):2
FILTRATION
Engine:Replaceable cartridge filter
Transmission:One magnetic oil strainer and replaceable element by-pass filter
Steering & Braking:One magnetic oil strainer and replaceable element by-pass filter
Hydraulic System:Return filter
OPERATING MASS:
Operating mass (kg) (approx.):including single shank ripper – 36800
Blade Specifications General
BLADE ATTACHMENT 1 – Standard Machine:Tilt Semi u blade
Overall length with dozer:5937 With ripper – 7751
Max. Lift above ground / height (mm):1231
Max. Drop below ground/ Max digging depth:582
Blade / Dozing Capacity (Cum):11.24
Mass in (kg) Dozer Blade attachment / Dozing weight:4570 kg
Blade width (mm):3940
Blade height (mm):1698
BLADE ATTACHMENT (Optional blade):Not available
Overall length with dozer:
Max. Lift above ground / Max lifting height (mm):
Max. Drop below ground / Maximum digging depth:
Blade / Dozing Capacity (Cum):
Mass in (kg) Dozer Blade attachment / Dozing weight:
Blade width (mm):
Blade height (mm):
SYSTEM FLUID CAPACITY / Coolant and Lubricant
System (Refilling):Litres
Cooling System / Coolant (L):60
Fuel tank (L):753
Engine Oil (Crank case):47
Transmission, torque convertor:167
Bevel gear case and steering
Final drive (each side):23
Hydraulic tank:100
BRAKE
Type:The braking clutch is pressed by spring, separated hydraulic, meshed type Wet banding structure
Control / Actuation type:foot brake, hydraulic booster
CABIN:Sealed cabin with air conditioner with ROPS
INSTRUMENTATION:Hour meter, fuel gauge, temperature gauge, battery charge indicator, horn, oil pressure gauge, front light, rear lights, plough lights, indicator lights
ADDITIONAL ATTACHMENTS:1). Stage III engine, 2). 3 shank rippers, 3). Single shank ripper
Contact-Us: -Daya Charan and Company+918588815755D-2/96, Janakpuri,New Delhi, Delhi 110058http://www.bulldozer.coinfo@bulldozer.co
Article Source:
eArticlesOnline.com}